ttl 232r 5v pcb



Model No: YT-TTL-232R-5V-PCB

Product Description:

The TTL-232R-PCB is a USB to TTL serial UART converter PCB incorporating FTDI’s FT232RQ USB to Serial UART interface IC device which handles all the USB signaling and protocols.

The PCB provides a fast, simple way to connect devices with a TTL level serial interface to USB. Each TTL-232R_PCB contains a small internal electronic circuit board, utilizing the FT232R plus a USB type-A connector.

The PCB is RoHS compliant at TTL levels of + 5V or + 3.3V.

The PCB is USB powered and USB 2.0 full speed compatible.

Each PCB supports a data transfer rate up to 3 Mbaud and supports the FTDIChip-ID™, with a unique USB serial number programmed into the FT232R.

This feature can be used to create a security or password protected file transfer access using the PCB.

USB to TTL UART Cable, FTDI Chip

The FTDI Chip TTL-232R USB to Serial UART (TTL level) converter cables provide a simple and fast way to convert microcontroller UART serial I/O to USB.

The TTL-232R contains a small circuit board which includes the FT232x chip.

Encapsulated in a USB-A connector, making the cable easy and straightforward to use.

The circuit is powered from the USB +5 V power pins, and any Vcc connection is always at +5 V dc.

However, products are available with signal TTL logic levels of either +3.3 V or +5 V.

These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux. All of which are available, royalty-free from the FTDI website.

ftdi ttl-232r-5v-pcb Product Features

  1. TTL-232R Converter Cable provides a USB to TTL Serial interface with various end connectors.
  2. On board FT232RL/FT232RQ provides single chip USB to asynchronous serial data transfer interface.
  3. Entire USB protocol handled by the electronics in the cable USB.
  4. Connect directly to a microcontroller UART or I/O pins.
  5. 5V CMOS drive outputs and 5V safe TTL inputs makes the TTL-232R easy to interface to 5V MCU”s.
  6. +5V or +3.3V output allows external logic to be powered from the USB port.
  7. 6 way outputs provide Tx, Rx, RTS#, CTS#, VCC and GND (except Audio Jack which provides only TX,RX and GND).
  8. 3 way Audio Jack connector provides Tx, Rx and GND.
  9. Low USB bandwidth consumption.
  10. UHCI / OHCI / EHCI host controller compatible.
  11. USB 2.0 Full Speed compatible.
  12. -40°C to +85°C operating temperature range.
  13. Cable length is 1.80m (6 feet).
  14. Custom versions also available (subject to MOQ).

Datasheet for TTL-232R-3V3-PCB and ftdi ttl 232r 5v pcb datasheet

View More Utech ttl-232r-5v-pcb